| Zip Chill Tap Zip Industries |
 Zip Chill Tap is great value for money when chilled filtered water is required. With an initial draw off of 8 glasses at one time and 60 to 140 glasses in an hour it’s the perfect alternative to bottled water and so much cheaper too. The air-cooled system means that the system doesn’t use water to chill water and that you only use water that you need.
The stylish, unobtrusive tap is located at the sink whilst the chiller unit remains out of sight beneath the sink. The fully insulated under-sink operating system incorporates excellent temperature retention properties.
The Zip five- micron carbon filters reduce dirt, rust, asbestos fibres and other particulates such as oxydised iron, manganese and sulfides that can contaminate drinking water. They also eliminate offensive odours by reducing chlorine and other chemicals.
Installation
Location
• The tap should be mounted on a flat surface • The tap should be mounted at 45 degrees to the edge of the sink so it drains into the sink when running • The under-sink chiller should be located as closely as possible to and directly under the tap or up to 1 metre away • The under-sink chiller must be installed with clearances of 50 mm left, right, rear and above • Filter should be mounted where readily accessible on the chiller or on the adjacent cupboard wall
Plumbing
• Should be installed only by a tradesman and in accordance with manufactures instructions • Water connections 12.7 mm BSP • Pressure relief valve set at 700 kpa
Venting
• The cupboard containing the under-sink unit must be amply ventilated as per manufacturers instructions • Cupboard doors must be offset 4 mm all round for ventilation if required
Electrical
• To be wired to a 10amp GPO
Warranty
The Zip Chill Tap comes with a twelve-month warranty.
Available in these states
Available from
About Zip Industries Zip Heaters started life over sixty years ago as a manufacturer of water heaters.
|
